OPREATION
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Seite 36
Formatkreissäge / panel saw TS 315F-1500
5
OPREATION
5.1
adjustments
before initial
-
Before any adjustments the machine must be disconnected from the power supply to avoid
the risk of accidental switching on the machine!
-
Check that the set speed for the saw blade used is not too high.
-
Open only saw blades with a diameter of 315 mm.
5.2
Operation
5.2.1
Saw blade start / stop
If you want to press the ON OFF switch, the combined
EMERGENCY STOP switch must be in the open state.
To start, press the green button ˝ I ˝
To start, press the red button ˝ O ˝
INFO:
In the closed state of the main switch can be operated as an EMERGENCY STOP switch.
5.2.2
EMERGENCY STOP switch
When operating the machine stops immediately. To pull out you have to
turn it to the right and optionally wear something.
5.2.3
Saw blade height adjustment
To adjust the height of the material saw blade, turn
the handwheel clockwise around the saw blade
upward lift. Turn to lower it to the left.
Summary of Contents for TS 315F-1500
Page 58: ......
