background image

  

HOLZMANN MASCHINEN GmbH   www.holzmann-maschinen.at 

 14

 

 

LSR10M / LSR15M

 

13

 

SAFETY 

13.1

 

Intended Use 

The machine must only be used for its intended purpose! Any other use is deemed to be a case of 

misuse.  
To use the machine properly you must also observe and follow all safety regulations, the 

assembly instructions, operating and maintenance instructions lay down in this manual. 
All people who use and service the machine have to be acquainted with this manual and must be 

informed about the machine's potential hazards. 
It is also imperative to observe the accident prevention regulations in force in your area. 
The same applies for the general rules of occupational health and safety. 
The machine is used for: 
Connection to a compressor for the supply of compressed air tools and applications. It is used 

exclusively for the transport of compressed air; Fluids must not be transported. 
Only accessories suitable for the air hose reel may be used. 

Any manipulation of the machine or its parts is a misuse, in this case 

HOLZMANN-

MASCHINEN

 and its sales partners cannot be made liable for ANY direct or indirect 

damage. 

13.2

 

Security instructions 

Missing or non-readable security stickers have to be replaced immediately! 
The locally applicable laws and regulations may specify the minimum age of the 

operator and limit the use of this machine! 

To avoid malfunction, machine defects and injuries, read the following security instructions! 

 

 

Mount the machine before first use. 

 

Use the machine only with compressed air. The machine must not be used with 

liquids. 

 

If the hose is released during roll up the hose end would be uncontrolled. Yourself 

and others can thereby hurt or damage property. Therefore never release the hose 

when rolling up. Maintain control the hose end always till finishing the rolling up. 

 

Only use accessories that are in perfect condition and are intended for use with the 

machine. 

 

Never exceed the maximum operating pressure of the machine or the compressed 

air tool you are operating with. 

 

Only connect the machine to a supply which ensure that the maximum permissible 

pressure is not exceeded. The supply must be secured by a pressure control valve 

(pressure reducer) installed in the compressed air line. 

 

Protect the hose from heat, oil and sharp edges. 

 

Check the hose before using the machine. 

 

Operating only with one compressor. 

 

Operation with compressed air bottles is not permitted. 

 

The operation of compressed air tools with combustible gases is prohibited. Risk of 

explosion! 

 

Keep children away from your work area. 

 

Never aim the machine or its hoses against people or animals. 

 

Turn off the air supply when adjustment, maintenance, repair-work and cleaning. 

Disconnect hose from the air supply after operating! 

 

Do not use the hose to carry the machine. 

 

Hold the hose firmly when disconnecting it from the supply of compressed air or a 

compressed air tool from the machine. Flapping hoses represent a risk of injury. 

 

Note the safety instructions of the connected devices. Wear prescribed protective 

equipment (hearing protection, safety goggles, protective mask ...) 

Summary of Contents for LSR10M


























Reviews: