CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
44
KAP305JL
17.2.2
Adjusting the angular position (by means of stop angle)
90°-cut
Lower the machine head and secure it
with the locking bolt.
- Loosen the fixing screw (1).
- Position the 90° stop angle (W)
between saw blade and rotary table.
- Loosen the lock nut on the adjusting
screw (2) and adjust the adjusting screw
(2) until the angle between saw blade
and rotary table is 90°.
- Retighten the lock nut.
- Then check the position of the angle
indicator (4). If necessary, loosen the
pointer (3) with a Phillips screwdriver and
move it to the 0° position on the scale
and then fix it again.- Loosen the lock nut
on the adjusting screw (3 or 4) and turn
the adjusting screw
17.2.3
Saw blade change
- Loosen screws (S1)
- Swing the machine head upwards
- Swing the movable circular saw blade guard (2) backwards.
- Unscrew the screw (S2) until the plate (1) can be pushed upwards until the flange screw (S3)
is accessible.
Press the spindle locking knob (5) lightly and turn the saw blade until the spindle lock engages.
C A U T I O N
Risk of injury! Wear protective gloves when changing the saw blade.
Summary of Contents for KAP305JL
Page 171: ...HOLZMANN MASCHINEN GmbH www holzmann maschinen at 171 KAP305JL ...
Page 184: ......
