HOLZMANN MASCHINEN FKS 301VF-3200, User Manual

Page: 34 / 48

HOLZMANN Maschinen GmbH www.holzmann-maschinen.at Strana 34
Formátovací pila / panel saw FKS 305VF-1600 / 2600 / 3200
15 OPERATION
15.1 Adjustments before initial
 Before any adjustments, the machine must be disconnected from the power supply to avoid
the risk of accidental switching on the machine!
 Check that the set speed for the saw blade used is not too high.
 Span only saw blades with a diameter up to 305 mm.
15.1.1 Sets the speed / blade speed
The sliding table saw FKS 305VF-1600 / 2600 / 3200 has two different blade speeds (see tech-
nical data).
 Disconnect the machine from the power supply.
 Set the saw blade tilt to 45 °.
 Open the machine door.
 Push the clamping lever down
-can with earlier machine type vary-
 Place the belt to the desired position.
 Pull the cocking lever back up and secure all of the dissolved components.
 Disconnect the machine from the power supply.
 Set the blade tilt to 45 °.
 Open the machine door.