HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Strana 33
Formátovací pila / panel saw FKS 305VF-1600 / 2600 / 3200
14.2.6
Electrical connection
Only a qualified electrician is authorized for the electrical connection, including the installation of
the supply part. This must be cut off before the electrical connection. Only if the main power sup-
ply is cut off, each contact can be closed. The cowl box is attached to the back of the machine
body. There is also a connection box on the side, which you have to connect only to the marking.
14.2.7
Control
After connection to the power grid, it is necessary to check the direction of the saw blade. To
start the engine briefly. If the blade rotates in the wrong direction, you have to fix the direction of
two cord ends.
14.2.8
Connection of dust extraction system
The tube is 80 mm mounted on the guard. With a Y-connection of the hose can be connected to-
gether with the dust extraction under the worktop to a dust extraction system.
14.3
Earthing connection
A T T E N T I O N
When working on an ungrounded machine:
Serious injury due to electric shock in the event of a malfunction possible!
Therefore:
Machine must be grounded and be connected to a grounded outlet
The electrical connection of the machine is ready for operation on a grounded electrical out-
let!
The plug must be connected only to a properly fitted and grounded electrical outlet!
The supplied plug must not be changed. If the plug does not fit or is defective, only a quali-
fied electrical engineer may modify or replace these plugs!
The grounding conductor is green-yellow!
In the event of repair or replacement of the grounding conductor must not be connected to
an under voltage can!
Check with a qualified electrician or service that the grounding instructions are understood
and the machine is grounded!
A damaged cable must be replaced immediately!
Summary of Contents for FKS 301VF-3200
Page 47: ......
