HOLZMANN MASCHINEN D 510F, User Manual Translation

Page: 35 / 46

HOLZMANN Maschinen GmbH www.holzmann-maschinen.at Strana 35
D 510F
13.2 Cleaning
N O T E
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the
machine!
Therfore: When cleaning water and mild detergent if necessary use.
Bare surfaces of the machine against corrosion impregnate ( with anti-rust WD40
)
13.3 Disposal
Do not dispose of the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old
14 TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed
at the machine itself !
Trouble Possible Cause Solution
Machine does not start
 Switch defective
 Power supply is off
 Fuse is defective
 Circuit breaker is active
 Repair switch
 Repair power supply
 Change fuse
 Push in the circuit button
Strong vibration
 Warped workpiece
 Workpiece is wrong centered
 Loosen pulley
 Outworn pulley
 Turning lathe is on uneven surface
 Loosen tail- or headstock
 Too much speed
 Change material
 Measure the center newly
 Tighten the pulley
 Change pulley
 Level the surface
 Tighten
 Adjust speed
Bad turning result
 bad sharpened chisel
 Wrong chisel for this work
 Wrong adjustment of tool rest
 Sharpen the chisel
 Select the right chisel
 Adjust the high and the distance
of the tool rest