HOLZMANN MASCHINEN D 510F, User Manual Translation, Page: 27 / 46

HOLZMANN Maschinen GmbH www.holzmann-maschinen.at Strana 27
D 510F
11 ASSEMBLY
11.1 Delivery content
Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please
understand that later claims cannot be accepted anymore.
11.2 Preparatory activities
11.2.1 Workplace requirements
Choose a suitable place for the machine. Observe the safety requirements of Chapter 11 and the
dimensions of the machine from Chapter 4.4 .
The selected location must ensure as well as the possibility for connection to an extraction system
a suitable connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled on
all bases simultaneously.
You must also secure around a distance of at least 0.8 m around the machine. Before and behind
the machine must be provided the necessary distance for the supply of long workpieces.
11.2.2 Preperation of the surface
Eliminate the preservative, which is applied for corrosion protection of the parts without painting.
This can be done with the usual solvents. Here no nitro solvent or similar means, and in no case
use water.
N O T E
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in
damage to the surface!
Therefore:
When cleaning, use only mild detergent
11.3 Assembly
The machine is supplied in principle fully assembled. For transport reasons, it may be that some
components need to be assembled by the customer.