HOLZMANN MASCHINEN D 510F, User Manual Translation, Page: 26 / 46

HOLZMANN Maschinen GmbH www.holzmann-maschinen.at Strana 26
D 510F
NOT ON THE ROTATING PART ACCESS!
Pay attention to the rotating chuck and the workpiece during operation.
D A N G E R
Check and follow the instructions! Non-compliance may result in serious injury or
death! HOLZMANN engines can not be held liable for accidents if the safety
instructions are not followed!
10.2 Security instructions
 Impeccable sharpened tools.
 Using blunt tools is not permitted due to kickback, overload the machine and produce poor
surface during machining.
10.3 Residual risks
Even if they meet all the safety rules and if used properly, the following residual risks are
noted:
 Risk of injury to the hands / fingers during operation.
 Risk of injury from contact with live components.
 Risk of injury due to breakage or ejection of the workpiece.
 Injury to the eye by flying debris, even with goggles.
 Risk of inhalation of toxic wood dust in chemically treated workpieces.
These risks can be minimized if all safety regulations are applied, the machine is properly
maintained and serviced the machine as intended and is operated by properly trained personnel.
Despite all safety devices and remains their healthy common sense and your corresponding
technical suitability / training to operate a machine such as the lathe D 510F of the most
important safety factor!
IN THE OPERATION turning tool HARD AND KEEP SAFE!
The turning tool can be retracted from the workpiece during operation, thereby cutting
injuries can occur.
CAN NOT BE AGREED LOADED COMPONENTS COULD BE THROWN
OUT!
Look for firm seating of the workpiece in the chuck and tailstock.