HOLZMANN MASCHINEN BBM35, User Manual

Page: 27 / 49

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 27
Beschlagbohrmaschine / hinge slot machine BBM 35MAN / BBM 35PNEU
11.3 General Safety
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.
 Make sure the work area is lighted sufficiently
 Make sure that the work area is well ventilated
 Do not overload the machine
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely and keep balance at all
times.
 Keep away from the running drill!
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
 Do not climb onto the machine!
 Attach the machine to the underground
 Respectively trained people only and only one person shall operate the machine.
 Do not allow other people, particularly children, to touch the machine or the cable. Keep
them away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The minimum safety distance is
2m
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be
caught and cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: ear protectors, dust mask and safety goggles when
working with the machine.
 Operation with gloves forbidden!
 Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There is a
risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)
 Check the cable regularly for damage
 When working with the machine outdoors, use extension cables suitable for outdoor use
 Do not use the cable to carry the machine or to fix the work piece
 Protect the cable from heat, oil and sharp edges
 Avoid body contact with earthed
 Rotating parts can cause severe cut injuries
 Keep the drills sharp and clean, so they get stuck less often and are easier to guide
 Keep any machine that is not being used out of reach of children
N O T I C E
Emergency procedure
A first aid kit in accordance with ISO 3864 should always be readily available
for a possible accident. Initiate the violation in accordance with the necessary
first aid measures. When requesting support, provide the following details:
1. Place of accident 2. Type of accident
3. Number of injured people 4. Type of injuries