OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
23
AKS 45IND
12.2.4
Setting the operating mode
Impact drilling:
Set mode adjustment to position
Drilling:
Set mode adjustment to position
Screwdriving:
Set mode adjustment to position
12.2.5
Setting the torque
With the torque adjustment, the required torque can be preselected in 2 steps. The inserted tool
is stopped as soon as the set torque is reached.
12.2.6
Setting gears
Set with gear adjustment gear 1 (for working with large drilling diameters) or gear 2 (for working
with small drilling diameter).
12.2.7
Switching ON/OFF
To start
the machine, press the ON-OFF-switch and keep it pressed.
The LED lights up and enables illumination of the screwing location in unfavourable light
conditions.
The speed of the switched-on power tool can be variably adjusted, depending on how far the ON-
OFF-switch is pressed.
Light pressure on the ON-OFF-switch results in a low rotational speed. Further pressure on the
ON-OFF-switch results in an increase in speed.
To stop the machine release the ON-OFF-switch.
12.2.8
Changing the tool
Open the keyless chuck by turning in against rotation direction
A and holding ring B until the tool can be inserted.
Insert the tool.
Firmly tighten the collar of the keyless chuck by hand in rotation
direction A and holding ring B.
This automatically locks the drill chuck
Summary of Contents for AKS 45IND
Page 31: ......
