HOLYKELL HPT619, User Manual

Page: 4 / 11

4.2 keys operating instructions
“
SET
” 、 “ ” and“ ”
buttons are placed on the terminal. User can use these buttons when the
t
erminal running in Set Mode and don‟t send any data
by SMS at the moment.
The menu have Four functions:
1)
“AS ”:
set Terminal address.
2)
“S
I
”:
set Terminal interval time.
3)
“
G
S”:
set Terminal work mode '0/1/2' (0---GPRS; 1---GPRS/GSM; 2---GSM)
4)
“
FS
”: set Terminal
Decimal point, Display units and Pressure/Level Span(calibrated sensor didn't
adjust this data!).
Buttons have long press and short press.
The users can do the steps following:
Step 1: Long press
“SET”
key to enter the setting interface, LCD will display
“AS”
.
Step 2:
Short press “ ”
key can switch
“AS ”
,
“S
I
”
,
“
G
S” and “
FS
”
menu.
Step 3:
Short press “SET” key in the “AS ” menu to enter the Terminal address
set interface, address
range is 0
～
253. Short
press “ ”
key to add 1 of address, short
press “ ”
to decrease 1 of address,
Finished , short
press “SET”
key to save address
to return or long press “ ” key to return
.
Step 4: Short press
“SET” key in the “
SI
” menu to enter
the Terminal interval time set interface,
interval time is 301
～
65535s
. Short press “ ” key to
adjust the value of the current position, short press
“ ” to
switch the current position, Finished , short
press “
SET
” key to save
the result to return or long
press
“ ” key to return
.
Step 5: Short press
“SET” key in the “
GS
” menu to enter the Terminal
work mode set interface, and
Short press “ ” key to
change mode and short press
“SET” key
storage.
Step 6: Short press
“SET” key in the “
FS
” menu to enter the Te
rminal pressure span, decimal point and
units set interface, then short press
“SET” key
enter pressure span setting and continue short press
“SET”
key enter decimal menu and press
“ ” key t
o change decimal position and the short press
“SET” key