HOLYKELL HPT619, User Manual

Page: 5 / 11

storage and at the same time enter Units set menu, the press
“ ” key t
o change unit and short press
“SET” key
storage and long press
“SET” key
to back
“
FS
” menu
or continue long press
“SET” key
to back
pressure/level reading windows.
Step 7:
Long press “ ” key in the “AS” to
quit setting interface. The LCD will display pressure
value.
Note: Long press
“ ”
key can make the terminal quit working mode to setting mode.
5. SMS configuration instructions
5.1 SMS example
Send:
HPTCONFIG:PHONE=+8613812345678; APN=CMNET; IP=47.88.14.174; PORT=8008;
SMS=1; TIME=350;
Reply: HPTCONFIG:PHONE=+8613812345678; APN=CMNET; IP=47.88.14.174; PORT=8008;
SMS=1; TIME=350;
5.2 SMS configuration notes and matters needing attention
(1) Flag bit
The configuration information must begin with "HPTCONFIG:", as the secret key configuration
identification message;
(2) Telephone number
Configure phone numbers, such as "PHONE=+8613812345678", phone number configuration length
must be less than 16 bit word length, you can bring country region information;
(3) Configure the SIM Card APN
(4) Server IP address
Configure the IP address, such as "IP= 47.88.14.174 " that supports only the IPV4 format length;
(5) Port number
Configure the IP port number, such as "PORT=8008", whose length is less than or equal to the 5 bit
word length, and the range is "1-65535";
(6) Configure the transmitter data mode
Configure data upload mode: