8
Rotor blade
B
(Motor 2)
Rotor blade
B
(Motor 4)
Rotor blade A
(Motor 1)
Rotor blade A
(Motor 3)
Head of the
model
Tail of the
model
Left
Right
●Push up the throttle stick slowly and the model takes off.
●To avoid any misunderstanding, we have defined the orientation of
the model as below: The head of the drone is set right ahead while the
tail face the player. The direction where the head of the copter points
at is named as “
forward
”, the direction of the tail is named as “
backward
”.
The direction that the copter flies up to the sky is named as “
upward
”;
The direction that the copter lands to the ground is named as
“
downward
”. Player’s left side is named as “
left
”, player’s right side is
named as “
right
”. All the directions mentioned in this manual
are subject to the definition above.
●Make sure that the battery (at the bottom of the drone) is well installed
and connected with power wire of drone. The model is OFF.
●Then turn on the drone; the flash LED light will keep flashing quickly,
the gyro of the drone will be in
signal detecting condition. Set
the drone to flat surface, about
4 seconds later, the flash light
will keep constant “ON”. It
indicates that signal connection is
completed and the drone is ready for flight.
The model
