6
Protection frame and landing gear installation
1.There are 3 interfaces on each motor cabinet. Insert the frame plugs
into the interfaces and fix it.
（
Pic.4
）
2.Fix the protection frame by screwing clockwise.
（
Pic.5
）
3.There are 4 interfaces at the bottom of the model, insert the
landing gear plugs into the interfaces and fix them. The landing gear
is trapezoid, make sure that the longer waist of the trapezoid point
to the direction of the model’s head.
（
Pic.6
）
Pic.4
Pic.5
Pic.6
Pic.7
Pic.8
Pic.9
Pic.10
How to change new battery for the model
1.Open the battery door by screwing counter-clockwise.(Pic.7)
2.Unplug the battery wire from the power wire plug of the model and
take out the battery.(Pic.8)
3.Connect the wire plug of the new battery and that of the model,
insert the battery into the battery compartment.(Pic.9)
4.Close the battery door and fasten it by screwing clockwise.(Pic.10)
