background image

Holtkamp Electronics SUNCASH engl.                 techn. Stand 04.2016                                                  4047_04.2016 V09.2019

- 5 -

Legal information

All rights reserved. No part of this manual may not be reproduced 

or copied in any form without permission of Holtkamp Elektronik 

GmbH. The rights for contained software in control and memory 

blocks are exclusively from the manufacturer. The reading and 

copying of the program content is strictly prohibited.

The Holtkamp Elektronik GmbH is not liable to the purchaser of 

this product or third parties for damages, losses, costs or ex-

penses caused by the buyer or any third party due to accident, 

misuse or unauthorized alterations, repairs or improvements. 

The Holtkamp Elektronik GmbH shall remain liable for any loss, 

costs, disruptions or consequential damages that result from the 

use of the control.

The technical data are up to date. Misprints, errors and modi-

fications excepted. Older manuals are no longer valid with the 

publication of this manual

 

Notes on cleaning, maintenance

SunCash is more or less maintenance free. By poor coin accep-

tance, the coin runway of the electronic multiple coin tester can 

be cleaned free of dust and deposits with a brush or a damp 

cloth. The casing can be cleaned with a damp cloth and a solvent 

free detergent. Do not at any time, use thinners, petrol, spirits, 

acetone or scrubbing cleaning agents. Conventional cleaning 

agents could damage the plexiglass window on the laser-cut ed-

ges.  

Warranty

On the function of the device is granted for a period of 12 months. 

The warranty is limited solely to technical defects of the unit, it 

can´t be accepted further claims. Further apply our general terms 

and conditions, stand of June 2011, for products and services of 

the electrical industry (ZVEI) - also see website: www.holtkamp.

de.

Any liability extinguished by the manipulation of the device.

Safety notices

The money changer are built according to the prior art and the 

recognized safety rules. 

Nevertheless, its use threats to life and limb of the user or third 

parties, or cause damage to the device or other equipment du-

ring use. Use the device only in perfect condition, and intended, 

safety and the risk of danger, in compliance with the instruction 

manual! Do immediately eliminate particular disorders, which 

may affect safety! Always keep the operating instructions directly 

to the money changer! Note, in addition to the user guide, the ge-

nerally applicable legal and other mandatory regulations relevant 

to accident prevention and environmental protection!

Perform no changes and/or modifications to the money changer 

without approval of the manufacturer! Spare parts must meet the 

requirements specified by the manufacturer. This is guaranteed 

only for original spare parts. Do observe the in the user manual 

specified or prescribed deadlines for recurring maintenance in

-

tervals! 

Do provide for the safe and environmentally friendly disposal of 

plastic parts and electronic replacement parts! The manufactu-

rer is not liable for damage caused by improper use. The user 

bears the risk. Intended use also includes compliance with the 

operating instructions and compliance with the inspection and 

maintenance conditions.

Summary of Contents for SunCash





























Reviews: