3
2
About the glucometer
Your TysonBio TB100
Blood Glucose Monitoring System
is made up of several components.
These instructions are designed to guide you through the operation of the system with detailed
directions and pictures.
our starter kit contains:
•One glucometer
•One vial of test Strips (10)
•One lancing device
•Ten lancets
•One control solution
•One carrying case
•User manual
•Log book
•Quick reference guide
Note: 50 test strip vials can be purchased individually
TysonBio TB100 parts
1. Display – Your test results are displayed here. The large and
easy to read screen guides you through the test by using
numbers and symbols.
2. M Button - The M button is used to set time, alarm, enters the
memory mode to show the consecutive 7/14/30-day average
results and turns the meter ON and OFF.
3. S Button - The S (select/set) button is used to select year,
month, day, time, memory of results and control solution
mode.
4. Test port – This is where you insert the test strip into the meter.
5. Unit switch – Switch for unit of measurement – mmol/l or mg/dL.
1 mmol/l =18 mg/dL
6. Battery cover
7. Label
8. Reset button – Press this button to re-set the system
3
0000
0000
01
