Comparing control solution results
The system is functioning properly if the result falls inside the
specified range printed on the test strip vial. If the test result falls
outside the specified range, repeat the test.
Results falling outside the specified range may be caused by
• Error in performing the test
• Control solution temperature is lower than 15°C(59°F) or higher than
35°C(95°F)
• Expired or contaminated control solution
• Expired or contaminated test strips
• Meter malfunction
Note: The result will not be incorporated into the
average in the control solution test “ ctl “ mode.
DO NOT use the system if the problem persists.
Please contact your point of purchase or contact
the Customer Hotline service. See bottom of
manual for details.
Before testing blood glucose, you need the following items:
1. TysonBio
TB100
2. TysonBio TB100 test strip
3. Adjustable automatic lancing device
4. Sterile lancet
Caution: To reduce the chances of infection:
• Never share a lancing device and lancet with
another person.
• Always use a new and sterile lancet. Lancets are
for single use only.
11
Testing your blood glucose level
12
• Always use a new test strip. Test strips are for single use only.
• Do not get lotion, oil, dirt or debris in or on the lancet and
lancing device.
Preparing the test strip
1.Wash hands using soap and warm water. Rinse and dry
thoroughly.
2.Pull out a test strip from the vial and re-cap the vial
immediately.
3.Insert the test strip, white side face up, into the test port.
4.A beep will sound and white side face up will appear
followed by a flashing “ “ symbol. Now you are ready
to obtain a blood sample.
M E
M
