background image

Page 4

For technical questions, please call 1-888-866-5797.

Item 57056 

        

Sa
FE
ty

Op
E

ra
ti

O

n

Maint

E

nanc

E

S

E

tup

air Source

1. 

 

never connect to an air source  

 

that is capable of exceeding  

 

200 psi.

  Over pressurizing the  

 

tool may cause bursting, abnormal  

 

operation, breakage of the tool or 

serious injury to persons.  Use only clean, dry, 
regulated compressed air at the rated pressure 
or within the rated pressure range as marked on 
the tool.  Always verify prior to using the tool that 
the air source has been adjusted to the rated air 
pressure or within the rated air-pressure range.

2. 

Never use oxygen, carbon dioxide, combustible 
gases or any bottled gas as an air source 
for the tool.

  Such gases are capable of 

explosion and serious injury to persons.

Vibration precautions

This tool vibrates during use.  Repeated or 
long-term exposure to vibration may cause 
temporary or permanent physical injury, 
particularly to the hands, arms and shoulders.  
To reduce the risk of vibration-related injury:

1.  Anyone using vibrating tools regularly or for 

an extended period should first be examined 
by a doctor and then have regular medical 
check-ups to ensure medical problems are not 
being caused or worsened from use.  Pregnant 
women or people who have impaired blood 
circulation to the hand, past hand injuries, 
nervous system disorders, diabetes, or Raynaud’s 
Disease should not use this tool.  If you feel 
any symptoms related to vibration (such as 
tingling, numbness, and white or blue fingers), 
seek medical advice as soon as possible.

2.  Do not smoke during use.  Nicotine reduces 

the blood supply to the hands and fingers, 
increasing the risk of vibration-related injury.

3.  Wear suitable gloves to reduce the 

vibration effects on the user.

4.  Use tools with the lowest vibration 

when there is a choice.

5.  Include vibration-free periods each day of work.

6.  Grip tool as lightly as possible (while still keeping 

safe control of it).  Let the tool do the work.

7.  To reduce vibration, maintain 

tool as explained in this manual.  
If abnormal vibration occurs, stop immediately.

 SaVE tHESE inStructiOnS.

Summary of Contents for 57056

















Reviews: