TES2 and S12 Keypad Wiring
Polarity is Critical
12vDC
1.5A
*
MOV is recommended
Page 2
TYPE 6.2.0.7-RF
*
NOTE: MOV (metal oxide varistor) is the small red component which is included. Its purpose is to absorb “inductive kick
back” which can be created when power is removed from the strike.
Loop from DC Positive to contact common required for DC voltage to strike.
Remote
Bypass
Button
Gate Strike
DC Out for Strike
12 Volt -
12 Volt +
No Ring Jumper
House
Telephones
NOTE: Voltage from telephones is not
necessary for the system to work.
(See note ‘‘
No CO operation
”). The
connection between the main board
and the speaker board is
polarity
sensitive.
CO
Line
In
To
House
Phones
Door
2
Door
1
T1 R1 T2 R2
No Co Jumper
Use jumper in exernal
phone line is not used
J3
J4
J6
NC1 C NO1 NC2 C NO2
Door 1
Door 2
T-Relay Board (optional)
20
VAC
Cut for NO Contact Closure
AC Loop for Strike
