Page 8
TYPE
1.1.0.10-RF
VIO RAVA Quick Start
1. Plug the device into the network. Device will speak it’s IP address.
2. Navigate to device IP on a web browser.
3. Under “Configuration” please enter SIP ID for the name to be displayed, and enter the extension
of the Main RAVA Touchscreenunder “
Input Call ID 0 Default is CALL:CRESTRON”
*Note out of the box the “CALL:CRESTRON” default will ring all touchpanels in the CRESTRON
call group.
4. Configure the Audio setiings.
Note:RAVA Operation has been designated to “Push to Talk” (PTT)
from Crestron and only this operation will be supported.
Although full duplex and half duplex
are an option, these settingdo not perform best in all senarios. As a recommendation you can
experiment for the best audio settings.
AUDIO SETTING BELOW ARE ONLY A RECOMMENDATION
