C-1000B Door Controller Programming
TYPE 115
Page 7
1
Make sure C-1000B is in Programmin Mode - See Page 8
2
Program Aux Contact activation time as follows:
3
Enter time (seconds) follwed by #03
EXAMPLE: 01#03 programs Aux Contact for 1 seoncd.
Program Auxilliary Contacts*
Step
Action
*In this mode, Auxiliary contacts can be activated (closed) whenever Doorbox 1 or Doorbox 2 is activated.
See page 2 or 6 of this document for the location of the terminals on the C-1000B
The steps above are for “timed activations” (0.5 to 10 seconds). See page 8 (Section 6) of the C-1000B manual for a
description of other Auxiliary Contact Modes.
ADDITIONAL C-1000B MODES:
Doorbell Mode
- phones will not ring when doorbell is pushed. This is useful when
conventional door chimes are desired. In order to use this feature, the
Auxiliary Contacts must be programmed. (see above)
Custom Ring Mode -
Distinguishes doorbox ring from CO ring when connected to KSU.
CCTV Video Control Mode -
The C-1000B can switch 2 CCTV cameras, displaying the
camera at the doorbox which initiates the call. This mode
cannot be used when the “Auxiliary Contacts” are being used.
REFER TO C-1000B MANUAL FOR MORE INFORMATION ON THESE, AND OTHER MODES OF OPERATION.
Return to normal use mode
Step
Action
NOTE: Entering a time “00” sets time = 1/2 second
1
Slide the TALK BATTERY switch to the OFF position.
2
Move DIP SWITCH 2 from ON to OFF.
3
Re-connect the PHONE LINE INPUT and LINE OUT TO PHONES.
