HOLOPHANE
®
Predator
®
LED Flood
Installation and
Large and Medium
Maintenance
Manual
IM-365-A
GR2279
1
INTRODUCTION
1.1
Product Description
The Predator
®
LED Flood luminaire has been listed to applicable U.S.
& Canadian safety standards by Underwriters Laboratories Inc. It is
suitable for use in wet locations and ambient temperatures up to 40°C.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
The LED driver/door assembly can be detached for repair by
disengaging the hinge and unplugging electrical connectors. See
Figure 4.
1.2 Alternate Information Sources.
If additional questions
arise relative to these luminaires that this document or your supplier
cannot answer, please refer them to:
Holophane
Field Service Department
P.O. Box 3004
Newark, OH 43058-3004
(740) 345-9631
2
INSTALLATION
2.1 Tools and Materials Required.
DESCRIPTION
USE
9/16” Hex Wrench
Knuckle fitter bolt and set screws,
3/8-16UNC Yoke bolt
3/4” Hex Wrench
1/2-18UNC Yoke bolt
7/8” Hex Wrench
Yoke nut
1/4” Nut Driver
Knuckle Fitter Wiring Cover
3/16” Allen Wrench
Closure Screws (Not needed for TL option)
Torque Wrench (ft.-lbs.)
Mounting Bolts, Knuckle fitter bolt and set
screws
Figure 1
GR2276
Figure 2
GR2280
2.2 Yoke Mount Installation.
This luminaire is pre-wired with a UL listed wet location power cord and
fittings, so it is not necessary to open the housing door to install or wire
the luminaire. If access to the interior of the housing is necessary, refer
to the MAINTENANCE section (SECTION 3) below.
2.2.1
Bolt the yoke to the mounting structure using either two 3/8"
bolts or one 3/4" grade 5 bolt. Tighten bolts securely (30-35 ft.-lbs. for
3/8" bolts or 190-200 ft.-lbs. for 3/4" bolt). The bolts and other
hardware are not provided. See Figure 2 for mounting hole pattern.
2.2.2
Make all wiring connections in accordance with approved
wiring methods.