HOLOPHANE
®
Phuzion
TM
PHZL Remote
Installation and
Highbay Luminaire
Maintenance
Manual
IM-394
Figure 1
GR2438
1 Introduction
1.1 Product Description.
The Phuzion
TM
PHZL Remote
LED fixtures have been designed and tested in
accordance with applicable UL/CSA standards and are
suitable for use in damp locations. The remote fixture
will come with an Electrical Housing set up for hook
and/or surface mounting. The Optical Housing will be
separate and require a rigid stem attachment. Optical
Housing max weight is 30 lbs. Electrical Housing max
weight is 25 lbs.
2 Installation
2.1 Tools and Materials Required.
TABLE 1
Installation Tools and Materials
DESCRIPTION
USE
5/16” socket
Electrical Door, Stem Set Screw
3/8” socket
Electrical housing surface
mount
2.2 Stem to Optical Housing Installation (Figure 2, 3)
2.2.1
Ensure the ground wire and all (3) sets of input
leads are present and accessible from both ends of the
stem. Do not remove labels from set of red & blue leads.
2.2.2
Remove cover from the wiring chamber of the
Optical Housing (Figure 2). Ensure that the Optical
Housing contains (3) sets of red & blue input wires and a
ground wire.
2.2.3
Route all wires from the stem into Optical Housing
wiring chamber via the
¾” NPT hole and thread the rigid
conduit into place, minimum 6 turns until tight.
2.2.4
Make all wiring connections inside the Optical
housing wiring chamber in accordance with approved
wiring methods.
2.2.5
Reinstall the wiring chamber cover and tighten the
screws
2.2.6
Take care not to pinch any wires while closing the
wiring chamber.
Figure 2
GR2442
Figure 3
GR2439