Hologic R2 DM, User Manual

Page: 72 / 106

Part 5: Controls
Retrieving Patient Information
This option on the Connectivity screen allows you to specify whether the R2 system
should retrieve information from your patient database. If set up properly, when you
scan the R2 ID, the R2 system will request that the database system transmit the
patient information associated with the case.
If a Hologic service engineer has configured the R2 system to communicate with the
patient database, then you can enable or disable the data transfer using the Retrieve
Patient Information setting on the Connectivity screen.
To enable or disable this feature, simply touch On or Off, as desired.
Enabling DigitalNow
The DigitalNow option on the Connectivity screen allows you to enable or disable
DigitalNow.
To enable or disable this feature, touch
On
or
Off
, as desired.
Enabling Verification
The Verification option on the Connectivity screen allows you to specify whether a
verification step will be required after you scan the films. For more information, see
‘
3.9. Verifying Scanned Cases ’.
To enable or disable this feature, touch
On
or
Off
, as desired.
Note: Changing the Verification status (‘On’ or ‘Off’) has no effect on studies
currently waiting to be verified or those currently processing. You must still manually
verify each case.
Note: Verification can be turned ‘On’ only if the DigitalNow option is also ‘On’.
64 R2 DM User Manual – PN MAN-01044 Rev 001