Hologic R2 DM User Manual Download Page 6

Page: 6 / 106

Contents

3.4. Scanning with a Manual Protocol

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.5. Scanning with the Any Protocol

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.6. Adding Cases to the Stack

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.7. Stopping Scanning and Removing a Case

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.8. Viewing Study Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.9. Verifying Scanned Cases

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.10. Correcting Scanned Images

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.11. Printing CAD Results

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.12. Searching for a Study

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.13. Using Queue Manager

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Part 4: Alerts

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1. Alerts Listed Alphabetically

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Archiving was cancelled for case (3045)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cannot process image successfully (1063)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cannot process this case (1062)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker attempted but could not send case (3016, 3018, 3031, 3032)

. . . . . . . .

ImageChecker attempted but could not print reimbursement report (2008)

. . . . . . . .

ImageChecker cannot contact the scanner (1010)

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker cannot identify the lead markers (3023)

. . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker cannot read the barcode (1041)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker is busy (3012, 1029, 1030)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker license not found (1024)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker could not print a CAD report (2007)

. . . . . . . . . . . . . . . . . . . . . . . . . .

ImageChecker could not send results (2005)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Images didn’t transfer (1031)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Image transfer was interrupted (3013)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Missing or invalid barcode at top of stack (1016)

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

No output jobs scheduled for case (3054)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No patient record information is associated with barcode (3501)

. . . . . . . . . . . . . . . .

Not all films in case are specified by scanning protocol (3024)

. . . . . . . . . . . . . . . . . .

Printer not found (3014)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Rebooting the operating system, please wait (5021)

. . . . . . . . . . . . . . . . . . . . . . . . . .

Reporting system query error (3502)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Restarting R2 software, please wait (5019)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scanner not ready! (5002)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scanner test failed (3025)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scanning is disabled, remote maintenance in progress (5010, 5059)

. . . . . . . . . . . . . .

Scheduled reimbursement report (5050)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shutting down the operating system, please wait (5020)

. . . . . . . . . . . . . . . . . . . . . . .

Shutting down the R2 software, please wait (5018)

. . . . . . . . . . . . . . . . . . . . . . . . . . .

The same barcode has been assigned to multiple patients (3500)

. . . . . . . . . . . . . . . .

R2 DM User Manual – PN MAN-01044 Rev 001

Summary of Contents for R2 DM











































































































Search results

Summary of Contents for R2 DM

Reviews:

Related manuals for R2 DM

Brands by name

Popular brands

Hologic R2 DM, User Manual

Search results

Summary of Contents for R2 DM

Reviews:

Related manuals for R2 DM

Brands by name

Popular brands