Cenova Image Analytics Server 3.0 User Guide
Chapter 3: System Operation
Page 22
MAN-05463-001 Revision 002
Server Assigns Images Received Before Timeout Elapses to One Case
The server assigns any image received after the time-out period to a new case using the
same study instance UID. At the review workstation, two sets of results will be seen,
distinguishable by the date and time they were produced by the server.
Server Assigns Images Received After Timeout Elapses to a New Case
To reduce the possibility of multiple results, Hologic recommends that images for each
patient examination be sent from the image acquisition system together at the close of the
study and in rapid succession.
Note
As an alternative, the server can be configured to group all images with the same study
instance UID automatically into a single case, no matter when they were received (i.e.,
include images from a previous case). For more information, consult with a technical
support representative.
It is the service representative’s responsibility to set up your system such that the images
are sent correctly to the server in addition to the review workstation and to the desired
final destinations. For more about the data flow among the various devices, see
on page 12.
3.3
Server Startup and Shutdown
The Cenova server does not require regular maintenance. The only procedures you might
need to perform are:
•
on page 23
•
on page 24
•
on page 24 (turning off and on again)
For these procedures, you need to know the IP address for the computer. You can get the
IP address from the Cenova System Settings – Connectivity screen. Write that number
here:
