Selenia Dimensions and 3Dimensions Systems
Addendum, Radiation Shield Installation
MAN-05397 Revision 002, October, 2017
Hologic, Inc.
Page 3 of 4
36 Apple Ridge Road, Danbury, CT 06810 (800) 447-1856
© 2017 Hologic, Inc. The information contained in this document is proprietary. Unauthorized distribution is prohibited.
2.
On the back of the workstation, remove the workstation shield bracket (item 6 in the
following figure, three screws on each side).
3.
Insert the back spacer (item 1) and the back reinforcement plate (item 2).
4.
Insert the shield (item 3). Two people are required for this action.
5.
Insert the front reinforcement plate (item 4). Push at the bottom of the front
reinforcement plate (item 4) to ensure plate is vertical and an equal gap on either
side, then insert the front spacer (item 5).
Figure 2:
Radiation shield installation
6.
Install the shield bracket (item 6 in previous figure), hand tightening the screws in
the order shown (A through F) in the following figure. After hand tightening screws,
tighten 1/4 turn or enough to flatten the lock washer.
Figure 3:
Shield bracket screw fastening
Summary of Contents for AW-17237
Page 2: ......
