• We do not take the responsibility of the damages that occur due to ungrounded
usage.
• Place your freezer in a place that it would not be exposed to direct sunlight.
• Your appliance should be at least 50 cm away from stoves, ovens and heater units,
and should be at least 5 cm away from electrical ovens.
• It should never be used outdoors or left in rain.
• When your freezer is placed next to a deep freezer, there should be at least 2 cm
between them to prevent humidity on the outer surface.
• Do not place anything on your freezer, and install your freezer in a suitable place so
that at least 15 cm is available on the upper side.
• If you place your freezer next to your kitchen cabinets, leave a space of 2 cm
between them.
• Install the distance adjustment plastic (the part with black vanes at the rear) by
turning it 90° to prevent the condenser from touching the wall.
• The adjustable front legs should stabilised to an appropriate height to allow your
freezer to operate in a stable and proper way. You can adjust the legs by turning
them clockwise (or in the opposite direction). This should be done before placing
food in the freezer.
• Before using your freezer, wipe all parts with warm water added with a tea spoonful
of sodium bicarbonate, and then rinse with clean water and dry. Replace all parts
after cleaning.
• Do not put hot items on the top of the freezer as this can cause damage.
Electrical Safety
This appliance must be plugged into an earthed socket.
Before switching on, make sure that the voltage of your electricity supply is the same
as that indicated on the rating plate. This product is designed to operate on 220
–
240V AC; 50Hz. Connection to any other power source may damage the unit.
This product may be fitted with a non
– rewireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or
damaged, the plug must not be used until a suitable replacement is obtained.
If the plug has to be changed because it is not suitable for your socket, or becomes
damaged in any way, it should be cut off and an appropriate plug fitted following the
wiring instructions below. This should be carried out by a qualified electrician. The
plug removed must be disposed of safely, as insertion into a 13 Amp socket is likely
to cause an electrical hazard.
For Customer Services, Spare Parts &
Manufacturer’s Guarantee Information please call
01204 664 084
-8-
