Door Reversal
You will need to tilt the freezer backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the freezer flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Reversing the door:
1. Remove the upper hinge cover (6) first.
2. Remove the two screws (1) that hold the upper hinge (5) (right side) to the
freezer body. Remove the upper hinge (5).
3. Lift the door and place it on a padded surface to prevent scratching.
4. Reverse the whole cover plate (7) from the left side to the right.
5. Remove the two screws (8) that hold the lower hinge (2) and remove the lower
hinge (2).
6. Remove the left front foot (4) and transfer it to the right side.
7. Before fitting the lower hinge (2), swap over the hinge pin (9) and the foot (3) to
the other side of the lower hinge (2). Then install the lower hinge (2) onto the left
side of the lower frame with two screws (8).
8. Position the door in place making sure the door seats onto the lower hinge (2).
9. Align the door in the closed position secure the upper hinge (5) in the top fame
on left side with two screws (1). Remember do not tighten the two screws (1)
until the top of the door is levelled with the top of the freezer.
10. Install the upper hinge cover (6) on the upper hinge
For Customer Services, Spare Parts &
Manufacturer’s Guarantee Information please call
01204 664 084
-6-
6
5
1
7
9
2
3
