EN
GRA4321 / GRA4331
916.001.324_000
37
3.8
Ram head
Two ram heads are delivered by default with every ram jack. Extra ram heads can be ordered if desired.
3.9
Ram support
The ram support is an accessory used for bodywork in an unstable condition. It provides a safe push-off
point to prevent slipping. The ram support has three push-off points and can be used in combination
with every ram jack. The push-off points are recognizable as round bars on which the ram head can be
placed.
3.10
Conical tip
The conical tip has a sharp point and can be used to make a hole in a plate. It can be placed on the end
of the plunger and/or fixed side, instead of the ram head.
3.11
Rim adapter set
The Holmatro rim adapter set consists of:
•
a storage/carrying case
Battery pack BPA283 28 V - 3 Ah
150.005.823
Battery pack BPA284 28 V - 4.1 Ah
150.005.214
Battery charger BCH1 220 - 240 V, 50/60 Hz
150.182.208
Battery charger BCH2 100 - 120 V, 50/60 Hz
150.182.209
Mains connector BMC 1 220 - 240 V, 50/60
Hz - 28 V
150.182.206
Mains connector BMC 2 100 - 120 V, 50/60
Hz - 28 V
150.182.207
Carrying belt
150.182.249
Battery pack pouch
150.182.214
Pushing set in trunk
This pushing set contains the following items:
150.582.008
•
ram head
150.033.032
•
wedge piece
150.181.324
•
conical tip
150.181.325
•
base plate
150.181.326
Set pulling head
150.582.281
Connection piece
150.181.327
Extension pipe - 165 mm
150.181.321
Extension pipe - 330 mm
150.181.322
Extension pipe - 600 mm
150.006.204
Pulling set in trunk
This pulling set contains the following item:
150.582.021
•
set pulling chains
150.582.152
Swivel head
150.182.047
Rim adapter
150.182.580
RAM support HRS 22
150.181.011
RAM support HRS 22 NCT
150.003.105
Description
GRA4321
GRA4331
