EN
28
917.219.005_005
JJ/PL
•
Remove the bottom, the ball bearing and the gear wheel on the screw.
•
Remove the screw from the plunger
•
Remove the ratchet shaft from its bearing bush.
•
Clean the parts with a degreasing agent. Remove any corrosion deposits.
•
Replace worn parts.
•
Lightly lubricate the parts with oil before fitting them again.
8.5
Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.6
Long term storage
•
Ensure that the equipment is completely depressurized.
•
Store the equipment in a dry, well-ventilated area. Use additional preservatives on the external steel
parts.
9
Decommissioning/Recycling
At the end of its service life the equipment can be scrapped and recycled.
•
Make sure that the equipment is put out of order to avoid any use.
•
Check that the equipment does not contain any pressurized components.
•
Recycle the various materials used in the equipment such as steel, aluminium, NBR (Nitrile
Butadiene Rubber) and plastic.
•
Collect all dangerous substances separately and dispose of them in an environmentally responsible
way.
•
Consult the Holmatro dealer about recycling.
Note
Remember not to lose the key for locking the gear wheel.
Summary of Contents for 200.401.001
