5
CAUTION
Allow enough space around the toaster for adequate ventilation. Do not operate the unit
without the crumb tray properly positioned. Overheating and poor toasting may occur.
Read all labels on the unit and follow their instructions.
ELECTRICAL CONNECTION
WARNING
Before making any electrical connection to this unit, check that the power supply is
adequate for the voltage, amperage and requirements stated on the rating plate.
A wiring diagram is included herewith.
Disconnect the unit from the power source before installing or removing any parts.
Be absolutely sure that the ground connection for the receptacle is properly wired. Do not
connect equipment to power without proper ground connections. Improper grounding may
result in personal injury or fatality.
WARNING
DO NOT CUT OR REMOVE THE SUPPLIED PLUG OR GROUNDING PRONG
FROM THE PLUG.
WARNING
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE
DATA PLATE OF THE UNIT.
WARNING
MAKE SURE ALL INPUT IS OFF OR THAT THE UNIT IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE INSTALLING OR REMOVING ANY PART.
WARNING
BEFORE INSTALLING UNIT (S), CHECK WITH LOCAL POWER COMPANY TO
DETERMINE ACTUAL VOLTAGE AT THE JOB SITE. NEVER PLUG A 208-VOLT
UNIT INTO 240-VOLTS OR A 240-VOLT UNIT INTO A 208-VOLT.
CRUMB TRAYS
The DT14 is equipped with two (2)
crumb trays that are positioned under
each conveyor. Operating the unit
without the crumb trays will cause it
to operate at a higher temperature
which will lead to unit shutting down.
Be sure to wipe the crumb trays clean
using a damp cloth, each day.
CLEAN
OPERATE
Crumb Tray Installation & Removal
