Repeat the hose removal process in reverse.
Attach the hose connector, plug the hose
connector on to the white plastic adaptor and
screw the hose clamp back into position.
Gently pull the newly installed hose to release
the auto retraction hose reel for it to start
winding the hose back in to the unit. The image
above shows how the hose reel should look
once fully retracted, ready for storage.
Hose Replacement Guide - 15m & 25m only
Hose Replacement - 1215H/1225H Models
General Note:
Once you have replaced your
hose, unscrew the brown plastic ‘hose stop’
from the old hose and screw onto the new
hose at the desired distance away from the
hose end, allowing the hose to stop at the
correct point when retracting.
Take the locking bars out of the retraction
wheel and secure them inside the hose
wheel unit.
Summary of Contents for 1215H
Page 11: ...Notes...
