Hollywog WiTouch Pro User Manual Download Page 4

Use

The WiTouch Pro exclusive, patent pending 3-stage waveform incorporates both clinical 

theories of TENS to provide pain relief. The 30-minute stimulation treatment is delivered as 

follows:

Stage 1: 5 minutes of high frequency stimulation that initiates a feeling of pain relief by 

suppressing the transmission of pain signals in nerves. This stage provides a high sensory 

sensation and allows you to establish a comfortable intensity setting for the entire treatment.

Stage 2: 20 minutes of low frequency stimulation that initiates an increased endorphin 

release in the body to reduce the sensitivity to pain for an extended period of time following 

the 30-minute treatment. This stage provides a low sensory sensation often described as a 

gentle tapping sensation.

Stage 3: 5 minutes of high frequency stimulation, providing the same high sensory 

sensation experienced in Stage 1. This stage allows you to maintain the feeling of pain relief 

and complete the overall treatment with a comfortable high sensory sensation.

Treatment Recommendations

• You can leave the device in position for multiple treatments during the day. It will

automatically turn Off after two (2) hours of inactivity. 

• It is recommended you wait a minimum of 30 minutes between treatments.

Conducting a Treatment

Always read the safety warnings before conducting a treatment. Follow these steps to 

conduct a treatment:

1.  Remove the green liners from 

the gel pads by slowly peeling

the liner diagonally from an 

inside corner to the opposite 

outside corner. Important!

Avoid contact of the gel pad 

with other objects. Contact 

with other objects may affect 

the pads adhesion properties. 

Save the green liners for 

storage of the device.

2.  Press, and hold, the On/Off

button on the WiTouch Pro 

device for one (1) second. The

LED will begin flashing 

indicating the device is ready 

for use. 

Note:

 The WiTouch

Pro device must always be 

ON prior to application.

3.  Align the center of the device 

over the spine and place the 

device on your back in the 

area of pain. If you cannot 

place the device properly, 

ask another person for 

assistance.

Important! Do not apply

the gel pads/electrodes 

directly over the spine.

2

1

3

1

Summary of Contents for WiTouch Pro

















Reviews: