HOLLY & MARTIN FA1137256, Assembly Manual

Page: 32 / 46

11 |
Operating Instructions:
Control Panel on the Front of Unit:
LED screen
1. Power 2. Flame
3
. Heater 4. Down Light 5. Log 6.Time
1. On/Off Main Power Button
a.
Press to switch the unit ON/OFF.
b.
Child Lock: turn the unit on and hold POWER button for at least 5 seconds until you hear a beep sound
(and the log blinks) to enter the Child Lock mode. To turn off the Child Lock mode, please press and
hold the POWER button again for at least 5 seconds until you hear the beep sound (and the log
blinks).
2. Adjustable Flame Brightness
Adjust the flame brightness level: F5 - F4 - F3 - F2 - F1 - OFF (F5 being the brightest and F1 the dimmest. F5 is
the default).
3. On/Off Heater Button
a.
Program the thermostat. The fireplace can be used without the heater if desired.
b.
Adjust the temperature rating from 62°F - 82°F - ON (17°C - 27°C).
Note: °F is the default unit. To change from Fahrenheit to Celsius: Hold the heater button for approximately
5 seconds. The temperature readout will switch directly from °F to °C and vice versa.
4. Adjustable Down Light Color
Adjust the Down Light Color: d0 - d1 - d2 - d3 - d4 (d0:OFF, d1:Red, d2:Orange, d3:Blue, d4:White).
5. Adjustable Log Brightness
Adjust the log brightness level: L5 - L4 - L3 - L2 - L1 - OFF (L5 being the brightest and L1 the dimmest. L5 is
the default).
6. Adjustable Timer
Control the duration of the heater function. Press the timer button until you have reached the desired duration
time. Levels: 30 min - 1H - 2H - 3H - 4H - 5H - 6H - 7H - 8H - 9H - OFF
ELECTRICAL CONNECTION:
A 12.5 AMP, 120 Volts, 60 Hz circuit with a properly grounded outlet is required. It is recommended that the fireplace be on
a dedicated circuit, as other appliances on the same circuit may cause the circuit breaker to trip or blow the fuse when the
heater is in operation.
ELECTRICAL SPECIFICATIONS
Voltage: 120 VAC, 60 Hz
Amps: 12.5 Amps
Watts: 1500 Watts
Lighting: LED