22
V125T/July 2020/V1.1
5.2
Control panel
The control panel on your magnetic drilling machine is designed for maximum operating safety.
1.
Magnet Switch (Illuminated)
2.
Motor NVR Switch
3.
Spindle Direction Switch
4.
Magnet Protection Fuse (2A Fast Blow)
[image 13]
5.2.1
Magnet Switch
The magnet switch (Image 13 - item 1) is an illuminated rocker switch.
When in the on position the switch will illuminate red.
This switch provides power to the electro magnet base.
The magnet switch must be turned on as soon as the machine is in position, before any attempt to
use the drill is made.
The magnet switch also supplies power for the motor to operate, if it is off the motor will not start.
