FM-ONE
HOKUTO DENSHI
CO;LTD;
株式会社
4
【
Brief specifications of the main body
】
Writable MCU:
Flash On-chip Memory made by Renesas Electronics Corp
of single power supply and H8SX/1650, H8SX/1651 Expternal memory
*MCU that appears in this document is the flash memory edition.( H8SX/1650, H8SX/1651 group is excluded.)
Writing mode:
On-board programming Boot mode
Writing voltage in the target: 5V or 3.3V (voltage span for UserVcc:2.5~5.5V Consumption current:
approx. 10mA)
Writable file format:
Motorola file (S format file) extension .MOT,
Intel HEX file (HEX format file) extension
.HEX
CF available:
Attachment CFU-IV128
Operation-checked CF
：
CF115-1G,CFS-64MX,
CFU-IV128 (I-O data Device Inc. )
SDCFB-32-801,SDCFB-64-801
（
Sun Disk Corp.
）
* Up to 10 projects in the
amount of memory
can be used.
CF Interface specification: accepts FAT12/FAT16, 3V, sector size 512,
and less than 2GB.
*It
’
s users
’
responsibility to use CF, whose operation is not checked by
HokutoDenshi Co., Ltd.
Power supply:
Attached AC100Vadapter, or two size AA nickel metal-hydride batteries
*The attached AC adapter is applicable in Japan.
DC+9V (DC+7V~+12V) Capacity: over 300mA, Jack:
Centre minus
(0V)
ø5.5mm/2.0mm
Do not use any articles other than the attached items as they may damage the
main body and MCU. Some expendables are sold separately.
*When using with batteries, It is recommended that nickel metal-hydride
batteries be replaced every hour though they do not die out.
*No battery is provided with the main body.
Body case size:
89
×
134
×
36mm
（
excluding the pronged top
）
Weight :
260g
（
excluding batteries
）
【
Specifications of FM
－
ONE Project File Maker
】
Attached application:
FM-ONE Project File Maker
Operation environment:
Windows2000,XP,Vista,7,8.1 amd 10
(Online writing is not available on Vista and 7.)
Japanese environment
*While using this application, don
’
t use other applications.
PC Interface:
USB port (Prepare a USB cable)
【
Parts names
】
【
Side of body
】
※
opposit side of target interface.
PC interface
（
USB
）
DC jack (attached adapter
）
WRITE button
CANCEL button
CF eject button
CF Access LED
UserVcc
・
TX/RX access LED
CF insertion slot
Parameter selection button
Target interface
▼
Main body LED
CF access:
Don
’
t remove the CF while light
is on as it runs a risk of
destroying saved data.
UserVcc
・
TX/RX access:
displays two-way
communication between the
main body and the target. Even
when USER VCC is powered on
and when the output of the
target TXD shows
“
Low
”
, LED
remains
“
OFF.
”
a swtich to update firmware.
This switch should be operated only when
the firmware needs to be updated.
The home position of this switch is left side.
Do not operate this switch during the
device is working or the device gets
critical damage.
Caution!
normal
firmupdate