HOKUTO DENSHI
CO;LTD;
FLASH2
株式会社
5
□
FLASH2 Power Operations
– Important –
UserVcc LED indicates the status of FLASH2 power on/off. Both 2 dry alkaline
cells and AC adapter can be used as a power supply for the FLASH2 itself. And
also FLASH2 needs UserVcc from the connected target board. UserVcc LED can
light when the both power supply are enough to operate.
The Order of Power Supply
We recommend the procedure below to avoid troubles.
Power
ON: FLASH2 body first, then the target board. -
Power
OFF: The target board
first, then FLASH2 body
-
Connectors & Cables
Please refer to the
“User’s Guide” about the connectors and the signal-names.
How to Purchase the Upgrading Control Software
Only upgrading the control software,
FLASH2
can adapt to every new MCU of Flash memory MCU
Microcomputers. For the series of single power supply, we present the new version for all Flash memory MCU
Microcomputers releasing one after another.
In using R8C
・
M16C series MCU, firmware in the programmer
must be updated. (Charged. For further information, see the end of a book.)
If you need your control software to upgrade, please feel free to ask by E-mail.
URL
：http://www.hokutodenshi.co.jp (Japanese site only)
1.
FLASH2 Power Supply
2.
Target Board Power Supply
1.
Power In
2.
Power In
PC
F2WinV2
Target Board
FLASH2
2.
Power OFF
1.
Power OFF
PC
F2WinV2
Target Board
FLASH2
1.
Target Board Power Off
2.
FLASH2 Power Off