Hokuto Electronic FLASH2, User Manual, Page: 14 / 19

HOKUTO DENSHI
CO;LTD;
FLASH2
株式会社
13
【
Outlines of each unit
】 (RX,740 Series)
Cable Name 20-14pin RX
20-14pin 740
Conversion unit
20<->14pin RX 20<->14pin 740
Included
14pins straight cable is attached 14pins straight cable is attached
Specification
Connecting to Emulator E1 and E20 *5 Connecting to Emulator E8a *4
Group of
supported
MCU
RX111
RX210,21A,220
RX621,62N,62T,62G,63T
RX630,631 740/3803,38D5
Price
¥2,000 ¥2,000
Notes:
*4 Please refer to
“E8a Emulator user’s manual” for this pin assign.
*5 Please refer to
“E1 Emulator user’s manual” or “E20 Emulator user’s manual” for this pin assign.
Please use programming tools with appropriate version of control software.
Please refer to the instruction manual for each connection on the target board.
how to connect

Writing restriction by on-chip oscillator of R8C group

The following items of MCU group cannot be written by an on-chip oscillator:

R8C10、R8C11、R8C12、R8C13、R8C18、R8C19、R8C1A、R8C1B、R8C20、R8C21、R8C22、R8C23、R8C24、R8C25、
R8C26 、R8C27、R8C28、R8C29、R8C2A、R8C2B、R8C2C、R8C2D、R8C2E、R8C2F
◆
About programming onto V850 series
It
’s possible to program onto devices ( shown as below ) with an optional conversion unit.
In connecting with the recommendation circuit of each series, the following conversion units are necessary.
Format
…
MOT/HEX
new elements will be added.
【
Outlines of each unit
】
(V850 Series)
how to connect
（
conversion unit only
）
Cable Name 20-16pin V850
Conversion unit
20<->16pin V850
Included －
Group of
supported
MCU
V850ES/Jx2,Jx3-L
V850E/Ix3
Price
¥2,000
Please use
“F2WinV2.exe” for control software.
Attached cable
Conversion unit
FLASH2
10pins or 14pins cable
Target board
10-14P conversion connector
（
TOE8
）
Some of the boards needs attached
10-14P conversion connector.
Attached cable
Conversion unit
Target board
FLASH2