background image

amount

pos.

designation

P4

door wing profile - right (95 mm)

P5

door wing profile - middle (95 mm)

P8

crossbar (57 mm)

P6

door wing profile - top/bottom (638 mm)

4

V37

corner angle 50/50/6

4

S46

countersunk screw 4,8 x 50

4

S50

countersunk screw 4, x 38

38

double revolving door (x)

step 7 

 

assemble of the double-wing revolving door - right -

countersunk screw 4, x 38

You will need following:

12

view from outside

corner angle

countersunk screw 4, x 38

countersunk screw 4,8 x 50

countersunk screw 4,8 x 50

countersunk screw 4,8 x 50

countersunk screw 4,8 x 50

countersunk screw 4, x 38

countersunk screw 4, x 38

13

Slide the corner angles into the door wing profile - right - and into the door

 

wing profile - middle.

Slide the door wing profile - top/bottom - on the corner angle, so that a

 

complete frame is formed.

Screw the frame in to the corner with the countersunk screws 4, x 38.

Insert the crossbar and tighten it to the frame with countersunk 

 

screws 4,8 x 50.

P4

P5

P8

P6

P6

corner angle

corner angle

corner angle

Summary of Contents for teahouse














































































































Reviews: