3
Assembly roof window
corner with grub
screw (V
3)
Side window profi
l
e (pos. 4.1)
Side window profi
l
e (pos. 4.1)
Top window profi
l
e (pos.4.2)
(This profile requires no T-seal)
Bottom window profile (pos. 4.2
corner bracket/roof window (V24)
automatic roof window opener
Mounting roof window
wrong!!!
right
Please push the roof window from the gable
end into the ridge profile and slide it into
position.
Install the automatic opener mount into the
crossbar.
Attach the roof window side profiles to the bottom roof window
profile using the corner brackets and the metal corners with grub
screws.
Insert the roof window glazing into the side/bottom profiles you
have assembled.
Attach the top roof window profile, tighten all grub screws and
insert T seal on the three lower sides of the roof window.
Angle
cut the ends of the T seal where they meet at the corners.
Seal with silicone to prevent leaks
!
Apply silicone to the short ends of the window extrusions
before inserting black corner bracket (V24).
Once the window
is assembled, us
e silicon
e
to seal where the polycarbonate
meets the aluminum framing of
the roof window.
See page 14
for details.
Attention:
In the bottom cross profile insert two hex
screws M6 x
2 (S2) for the window opener!
sash lock (V28)
may
be attached here
with
screw countersunk
head 3,5 x 22 (S
9)
scews.
