- 17 -
OPERATING INSTRUCTIONS
User can set up a time for automatic start/stop of the
Water Heater, by Timer function.
Time can be set by min. steps of 10 minutes, in a
24-hour system.
Method for programming automatic start (TIME ON):
To cancel TIME ON:
Method for setting TIME ON/TIME OFF:
Programming the automatic start followed by automatic
stop of Water Heater (TIME ON and TIME OFF in
sequence):
User can set his desired time for automatic start and
stop of Water Heater.
When the start time is earlier than the stop time, the
Unit will run between the set time.
When the start time is later than the stop time (for
ex. start at 06:00, stop at 04:00), the Unit will run
between the start time today and the stop time next
day.
When User sets up the same time for start and stop,
the Water Heater will start according to the set start
time and will automatically stop after 10 minutes.
Fig. 7-6
Fig. 7-7
Fig. 7-8
Fig. 7-9
Timer
•
Press the UP and DOWN key, you can increase
or decrease the water temperature.
When the set temperature is higher than 50°C,
the HIGH TEMP indicator will light.
Press the TIME ON key, the minute
digits of the clock on the display
start flashing slowly.
Press the TIME ON key, the minute
digits of the clock on the display
start flashing slowly.
Press the UP and DOWN key, you
can adjust the minutes.
Press the UP and DOWN key, you
can adjust minutes.
Press the TIME ON again, the minute digits
stop flashing and the hour digits start.
Press the UP and DOWN key,
you can adjust the hour..
Press the TIME ON key again
and wait about 10 sec., flashing
stops and ON TIMER set is
finished.
In the unlocked state, press the
CANCEL key for 1 sec. and the TIME
ON function will be cancelled.
HIGH TEMP
TIME
ON
TIME
ON
CANCEL
TIME
ON
Summary of Contents for HWMI 150 A
Page 26: ...NOTES ...
Page 27: ...NOTES ...
