Hoist Fitness HD1400, Owner'S Manual

Page: 8 / 41

F R A M E A S S E M B L Y
Step 2b
1 - Weight Frame Upright
2 - Weight Cage Top Mount
3 - Weight Stack Mount
9 - Guide Rod
10 - 12 ½ LB Intermediate Plate
11 - 8 ¼ LB Intermediate Plate
12 - 8 ¼ LB Top Plate
Part Descriptions
E - 1/2”-13UNC x 3 1/4” Hex Bolt
N - 5/16”-UNC x 5/16” Socket Set Screw (WZ)
AA - 1/2” Flat Washer
BA - 1/2” Nylok Nut
CB - Weight Stack Bumper
CG - Guide Rod Top Mount
Hardware Descriptions
Page - 7
HD1400 Assembly
OW N E R S
M A N U A L
Start by sliding (9) through (CB) and slide them both into (3). Tilt
both (9)’s forward enough to allow room to slide the weights on. Slide all
10 (10)’s, and all 5 (11)’s on to both (9)’s. Now slide (12) onto both (9)’s.
Slide (CG) on both (9)’s and angle both (9)’s vertical and secure (CG) to
both (1)’s and (2). Secure both (9)’s to (CG) using set screw (N).
Wrench
Tighten
all bolts.