Installation and commissioning of the machine
Hohner Maschinenbau GmbH
EXACT-PLUS
10/2010
29
3.11 Adjustment - guiding rollers on the delivery table
- Fig. 3.8 -
In order to obtain an exact sit-close scale tile delivery on the delivery table both guiding rollers -44-
have to be adjusted to the size of brochure (see illustration, top view).
- Loose the upper star handle screws -45- and move roll holders -46- on the axe -47- sidewards
until both guiding rollers -44- are approximately centrical to the thickness of the brochure.
- Retighten upper star handle screws -45-.
- Loosen star handle screws -48- at the side, move both supports -49- at the same time on the
guide bars -50- so far, that the brochure is falling exactly between conveying belt and guiding roll-
ers.
- Re-tighten star handle screws -48- at the side.
