Installation and commissioning of the machine
Hohner Maschinenbau GmbH
EXACT-PLUS
10/2010
21
3.4
Fine adjustment - clincher box
- Fig. 3.3 -
The middle of the driver -15- and bender -16- must be exactly in the middle of the clincher box -14-
(see arrows)!
- Now, rotate the unit by hand (see 3.12), until the driver and the bender are just over the clincher
box. Adjust the middle of the clincher box of the driver and tighten both
hexagon socket screws -13-.
Additional assistance by scales -17-
The right edges of stitching head and clincher box must be adjusted on the same scale setting -17-.
3.5
Pressure adjustment - clincher back press
- Fig. 3.3 -
- Loosen the hexagon socket set screw -18-, turn the hexagon head screw -19-
counter clockwise
to increase pressure or
clockwise
to decrease pressure.
- Then re-secure the hexagon socket set screw -18-.
The groove-middle of the driver -15- and the middle of the clincher box -14- must
coincide absolutely
TIP
