14
Other App Functions
1.
Gimbal Specs Setting
a.
Following Speed
(to adjust the following speed of pan/tilt/roll axes)
b.
Joystick Speed
(to adjust the rotating speed by control the joystick)
c.
Following Dead Area
(no following movement when the rotate angle is less than dead
area setting)
d.
Trim
(to adjust the tilt/roll axis in small angle to get a perfect balance)
e.
Joystick Reverse
(to reverse the rotation direction by control the joystick)
f.
Motion Torsion
(to adjust the motor torsion of pan/tilt/roll axes, which is useful to solve
the vibrate issue due to lightweight or overweight mobile phone)
2.
Firmware Upgrade
The firmwave is subject to upgrade without a fixed schedule. Firmware upgrade helps to
optimize the working of gimbal.
3.
Calibration
It requires to calibrate the gimbal only when you notice any kind of not level or drift on any of
the axes, please refer to the next page for details.
4.
Operation Instruction
