3
Mounting Considerations/
required adaptor Kits
Depending on the model of bike or what is already installed in the bike, a
Hogtunes amplifier adaptor kit may be required.
If you have a Standard, EG Classic, Street Glide or Ultra and this is the only
Hogtunes amp in the system, the amp will adhere to the top of the radio using the
supplied “hook and loop” adhesive. No adaptor needed.
If you have a Standard, EG Classic, Street Glide, or Ultra and this will be the
2nd amp in the system, Hogtunes “2CHSP” (Drag Specialties Part # 4405-0234)
is required. This kit bolts into your fairing and locates the REV 225-AA between the
radio and brake side speaker. Please do not continue the install until you have the
required parts. 2CHSP can also be used if you prefer not having an amplifier sit
on top of the radio.
If you have a Road Glide or Road Glide Ultra, Hogtunes has two different RG
adaptor kits available. If you don’t have the required adaptor kit, please do not
continue the install until you have the required parts.
1) If this is the only amp in the system or if you already have a Hogtunes NCA
450-AA or NCA 40.4 and are adding to the system, you will need Hogtunes
RG2CH-AA ( Drag Specialties Part # 4405-0486) which bolts the amp to the
main studs that attach the inner fairing to the frame of your bike.
2) If there is a REV 225-AA in the bike, it should be mounted to a plate
attached to the main studs that hold the inner fairing to the frame of the bike.
The second amp will bolt in using Hogtunes RG4CH-AA (Drag Specialties Part
# 4405-0405). This will locate the second amp off to the extreme brake side
of the inner fairing.
If you do not have the required adaptor, please consult your retail dealer.
