Thank-you for choosing the Hogtunes FLSK 225-AA Fairing Lower Speaker Kit with
Amplifier! Since positive word of mouth is the best way to grow our business, we
want your new system to work as well as it was designed to. If you have any
questions or concerns, we are here to help. Email [email protected], or call us
during regular business hours (EST) at (705)-719-6361. If you still need help, please
consider a professional installation by your motorcycle dealer.
Please read these important points before getting started!
* In its most common configuration, the supplied amplifier will power the lower
speakers, and your radios built in amplifier will power the front speakers which
is how this manual is written. If you are installing this kit on a bike with an
existing amp, CVO® Ultra Classic, or CVO® Road Glide Ultra, please email
[email protected] for more Information. There are too many ways to make
this kit work and have them all in this manual, so we will send install instructions
specific to what you are doing.
* FLSK 225-AA works on 1998-2013 bikes with a factory radio and Ultra Classic style
fairing lowers. This kit WILL NOT work if you have a 1998-2009 Road Glide
with the FLTR Road Glide specific lowers offered in those years.
* This kit cannot be used on 2011-2013 CVO® Street Glide or Road Glide Models that
came with factory amplifiers.
* For 1998-2013 Street Glide/EG Classic/Ultra Models, if you have something on top
of the radio already, and the amp in this kit will not fit, you can use Hogtunes
2CHSP (Drag Specialties Part # 4405-0234) mounting plate to relocate the amp
between the radio and brake side speaker.
* For ALL Road Glide Models with ULTRA style lowers, Hogtunes RG Adaptor kit
(Drag Specialties Part # 4405-0096) is required to install the amplifier properly!
Getting Started:
Step #1: Remove the seat, and both wires (+ and -) from the battery.
Step #2: Remove the outer fairing/headlamp assembly. Refer to a service manual if
you need help with this. Note: A towel on the front fender can help prevent
scratches or “dings” from dropped tools or fasteners etc.
Step #3: On Street Glide/Ultra Models, the amplifier gets mounted to the top of
the factory radio using the supplied “hook and loop” adhesive, and must sit so you
can read the text on top of the amplifier as shown in Diagram 1.1 .The amp needs to
mount as far back on the radio as possible so the fairing can go back on. The
minimum distance from the back of the radio to the most forward edge of the
amplifier is 5/8” (15mm). On pre-2006 model bikes, it is a tight fit, but will go. 2006
and newer Ultras have the CB Radio mounted on top of the radio. The hook and
loop adhesive is strong enough to have half the amp sitting on top of the CB radio
as shown in Diagram 1.2. Model 2006 and newer non-Ultras have a “bump” on top
of the radio that runs down the center of the radio.
2
Technical Specifications:
Hogtunes REV 225-AA Amplifier
RMS Power at 2 Ohms:................112.5 watts x 2
Freq. Response:............................30hz-25khz
Fuse at Amp:.................................15 amp
Hogtunes 352F-AA Front Speakers
Power Handling: ................................100 RMS-150 Peak
Frequency Response: ........................55hz-25Khz
Sensitivity: .........................................92 db 1watt/1meter
Nominal Impedance: .........................2.0 Ohms
Cool Factor:........................................EXTREME
Warranty Information:
Please Record Your Amplifier Serial # Here:______________________________
Hogtunes speakers are warranted for a period of 20 years. The REV 225-AA
Amplifier is warranted for 3 years from original purchase date. Proof of
purchase is required for all warranty claims. The warranty applies to the
original retail customer and is not transferable. Please contact Hogtunes for
all warranty claims. Products found to be defective during the warranty
period will be repaired or replaced (with a product deemed to be equivalent)
at Hogtunes sole discretion. Hogtunes complete warranty policy is available
on our website at www.hogtunes.com/warranty.html.
What Is Not Covered:
1) Any expense related to the removal or re-installation of Hogtunes products.
2) Repairs to these products performed by anyone other than Hogtunes.
3) Subsequent damage to any other components.
4) Any product purchased from a non-authorized Hogtunes dealer.
5) Damage to Hogtunes products due to an accident or collision.
6) Hogtunes Amplifiers with broken or removed “warranty void” stickers.
7) Damage due to water from custom installations.
8) Damage from incorrect installation, improper use, abuse or modifications.
9) Damage to inbound product due to improper packing.
7
IMPORTANT: In the event of a warranty claim, please fill out the form
in the Warranty section of our website. Valid claims will have an
Return Authorization Number (RA#) generated which MUST
be visible on the outer box when it arrives to our offices.
Goods Arriving Without an RA# will be refused!
