15
• Take the white/black wires on the amps input harness (female
connectors) and plug them into the bikes White/Orange and Green/
White wires male connectors.
• Each connector is pre-sized correctly and can only go in one way.
Step #3: At this point the “special” wiring for CVO models with factory amps
under the tour pak is complete. From here, you will complete the install
by going back to page 7 and starting at Step #4.
Hogtunes products will play much louder than the
Original Equipment, which can be a distraction to
the rider and/or passenger. Please use caution
when adjusting, or playing your stereo
at high volume, especially in traffic.
You are a valued customer so please:
Ride Alert
Arrive Alive!
www.hogtunes.com
