background image

  SYSTEM UPGRADE #1 

 

This system has the incredible power of 2 NCA 70.2 to your bike! The first amp 
will run your fairing speakers, and HF-1/HF-2RG Tweeter Pod (if present). The  
amplifier supplied in your FL7/Rev kit is used to power the 7” woofers. If you have 
an Ultra Classic, or Road Glide Ultra, in this configuration, your radio will con-
tinue to power your rear speakers

WARNING:

 If you choose to add a 2nd amp to power your fairing speakers, 

please make sure the speakers you have can handle the ACTUAL power of this 
amp! Stock speakers should not be used. If you choose a brand other than  
Hogtunes for your fairing speakers, be advised, we have seen many competitors 
over-rate the ACTUAL power handling of their speakers by as much as 3 times!!

Use supplied blue plug send 

signal from expansion port of first 

amp to input of second amp

Optional 

HF-1/HF-2RG 

Tweeter Pod

11

12

  SYSTEM UPGRADE #2 

 

This system uses a Hogtunes NCA-40.4 160 watt 4 channel amp and a NCA 
70.2 for the ultimate in power! As shown below, the typical system would have 2 
channels of the 40.4 power the fairing speakers while the other 2 channels power 
the rear speakers. The bypass out of 40.4 is used to send music to the NCA 70.2 
which powers the fairing lower speakers.  If you have an Ultra or RG Ultra, our 
Big Ultra, or Big RG kits have everything you need for this upgrade all in one box. 
Everything installs easy and your fader still controls front/rear. If you have a “non-
Ultra” but have added a King Tour-Pak® and Ultra Style Fairing Lowers, Hogtunes 
Rear Speaker Pods can be added and the system below is also easily done.

 

Use supplied blue plug send 

signal from expansion port of first 

amp to input of second amp

Optional 

HF-1/HF-2RG 

Tweeter Pod

Summary of Contents for FL7REV









Reviews: